Incinerators differ from the simpler methods of open burning as the operator has a higher degree of control over the burning process. The resulting higher temperatures, longer holding times and greater turbulence lead to more complete combustion of the waste. Although a wider range of wastes can be destroyed using high temperature single or dual-chambered […]

The following are excerpts from the Environmental Protection Act 1.    “Contaminant” means any noise, heat, vibration or substance and includes such other substance as the Minister may prescribe that, where discharged into the environment, (a)    endangers the health, safety or welfare of persons, (b)    interferes or is likely to interfere with normal enjoyment of life […]

People living and working in Nunavut often have limited options available for cost effective and environmentally sound management of household and other solid waste. The widespread presence of permafrost, lack of adequate cover material and remote locations make open burning and incineration a common and widespread practice to reduce the volume of solid waste and […]

The combustion, or burning, of solid waste proceeds through a series of stages. Water is first driven from the unburned waste by heat produced from material burning nearby or from an auxiliary burner. As the waste heats up, carbon and other substances are released and converted into burnable gases. This is referred to as gasification. […]

The burning and incineration method used is a major factor in determining what type of waste can be safely and effectively disposed of. The methods commonly used in Nunavut include open burning on the ground, unmodified burn barrels and various mechanical incineration systems.  Other useful methods include the use of burn boxes and modified burn […]

Specifications of ovens: Installing a readymade concrete base (Precast) with Height 30 cm above the ground and 20 cm below the surface of the earth. The dimensions of the base are increased by (2 meters) from the edge of incinerators The rest of the accessories in all the trends even allows the worker directly feeding […]

Made-in-Vietnam waste incinerator shows its power VietNamNet Bridge – The waste incinerator of Vietnamese inventor Trinh Dinh Nang has been used in Bac Kan, Tuyen Quang and Thanh Hoa. But if it is used in other provinces as well, and therefore, can be produced on a large scale, the production costs will be much lower. […]

The new plant would help in reducing energy losses in the incineration process as well as reducing harmful emissions Wasteserv inaugurated a €12 million animal waste management in Marsa earlier today. Speaking at the inauguration of the new Wateserv EU-funded autoclave rendering plant for the treatment of animal waste, Wasteserv CEO Tonio Montebello said that […]

Model CA50 Feed Capacity Average 60 kgs per feed Burning Rate Average 70 kgs per hour Burning Time per Feed 1 hour Voltage 220V Power 0.7Kw Fuel Diesel oil Burner Italy Burner Feed Mode Manual Fuel consumption (Oil) Average 18 Kgs/Hour Internal Dimensions 100x80x70cm (Primary Chamber) External Dimensions 230 x 130 x 155cm (main body) […]